I do lighting design in small theaters & have a fair amount of my own gear. I have a ton of 3-pin, 4-pin, and 5-pin XLR cables, and also some adapters that convert between 3&5 pin. I use colored zip ties on the ends of each cable to not only tell me what type of cable it is but to distinguish my cables from the theaters cables.
Additional Pro Tip: Colored Zip Ties
Good tip though 👍
Zip ties are too small to write on.
Liebherr have little tags you print on that are secured in a plastic sleeve be a zip tie for cable identification
I do lighting design in small theaters & have a fair amount of my own gear. I have a ton of 3-pin, 4-pin, and 5-pin XLR cables, and also some adapters that convert between 3&5 pin. I use colored zip ties on the ends of each cable to not only tell me what type of cable it is but to distinguish my cables from the theaters cables.
Sometimes writing isn’t necessary, just gotta distinguish between two different wire harnesses.
Coloured electrical tape works. Make little flags.