With a thermostat, smart or dumb, you set a target temperature and a time. With a dumb thermostat it waits till that time and then activates. With a smart thermostat it should learn how long it takes to heat or cool to that target temperature in certain conditions and then aims to hit the target at that point.

So if you got up at 8am and wanted it 20c with a dumb thermostat you got to work out when it needs to go on in order to hit that as no heating system is instant on something the size of a house, with a smart thermostat with learning you do not need to do that at all, just set it for 8am.

As no system is working in a vacuum how hot or cool it is outside, even how sunny it is, has a big impact on how quickly your system heats or cools. Being able to measure and compensate for the outside temperature means the actual start time can be adjusted for you. This can save significant amount of cash.

As an example, lets say the outside temperature was going to be -10c 6am till 8am and you wanted it 20c by 8am. Doing it with a dumb thermostat you would either have to live with an under or overshoot on temperature. Say next day its 2C, now you need to adjust your overshoot again. With a smart thermostat I do not need to do that at all.

Sure, you can just live with the under/overshoot, but its better for your bills and better for the environment not to.

Nice, sounds a lot better than the Hex

If you can wait I would, the OG hex is pretty damn slow. I have one as a backup router and even then I wouldn’t want to use it long term.

RB750GRE

They should all be able to run a VPN, its just the speed you’ll get through it that will vary. That particular model is pretty old now I would not get that unless your budget is limited. The refreshed version of that is the E50UG, which is a lot more powerful, but its still a budget device. I have no idea when openwrt will be coming for the refreshed hex, but it should not be that long as other arm devices from mikrotik are supported.

It requires a bit of work to setup routeros but the guides for the common tasks are easy enough to follow. Its only if you want to do something outside of the guides or miss a step that it becomes a PITA if you aren’t familiar with networking.

Mikrotik wont need openwrt unless you are dead set on having an open source OS on your device.

Mikrotik supports all sorts of VPN connections, both client, server, and site to site. You could even get creative and have it for certain services or IP addresses.

If you get one of the more modern devices it will support a pretty chunky VPN as well, mine can get over 600mbps without much hassle.