I’ll agree that the diff in foreground is skewing it a bit. I’ll edit this because I think you mean 1.5-2m between the boat and bear. If the bear is normalish sized it should be about 1.5m(5ft) tall. The guy in the boat is probably similar but he is also standing on something at or below water level versus above it like the bear. Which also gives the illusion of the bear being bigger.

Polar bears change weight significantly throughout the year. So that can change what they look like wet as well. Their fluff will always be less.

The point I was trying to make… A gorilla’s strength is technically enough to lift a polar bear’s weight but it’s in the upper end of their strength. The bear is going to fight every step of the way and it’s not going to behave like an inanimate object. The bear is almost guaranteed to have one or two limbs on the ground at all times providing it leverage. Polar bears can lift approximately twice what a gorilla weighs. Add in its nearly 2x size advantage, 3-4x weight advantage, the thicker hide, ~10cm of fat insulation, 5-7cm claws, and carnivorous focused teeth…I don’t see it ending well for the gorilla.

Not only that but every house I’ve ever lived in has a pressure reducing valve right after the main shutoff. My current one drops the 150psi city pressure down to about 60psi for use in the house.

Polar bears are fucking massive. Not just in weight but everything. I give reach to the polar bear as well.

Some of the largest gorillas have a standing height of ~6 ft. A polar bears standing height is 10-11 ft. Their average shoulder height on four legs is 5ft. The bear out weighs a gorilla about 3-4x.

My money is on the bear. The gorilla would probably land some good hits but the second the bear can pin down its movement that fight is over.

It’s US electrical in the post. The first link is only valid for US electrical but I’m sure similar things exist for other countries. The last link is just a cable channel. Nothing special, just looks nicer. They make thinner or wider variants.

Links are just easier than posting 15 images. Here’s the main images for both products.

That first link the top panel has a normal outlet in it but the bottom panel is a male plug. You have to use an extension cord to jump it over to an outlet which could be on your UPS.

Assuming you can cut into the wall… This is likely the cleanest option without doing electrical work.

https://www.homedepot.com/p/Commercial-Electric-Flat-Panel-TV-Cable-Organizer-Kit-5623-WH/305090874

If that extension cable jump isn’t up to the electric code they do make something similar where you can tie it into the hardwire as well. It doesn’t look like you have an outlet in the same stud section though. Which would make that harder.

Any remaining cables horizontally I’d just stuff in something like this above the trim at the bottom. You’d probably want to either source a black one or just paint it to match your walls.

https://www.homedepot.com/p/Commercial-Electric-4-ft-Flat-Screen-TV-Cord-Cover-A31-KW/304502793

deleted by creator

deleted by creator